| PART |
Description |
Maker |
| RIF-3-RPT-LV-230AC |
Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, plug-in display/suppressor module, and retaining bracket.
|
PHOENIX CONTACT
|
| RIF-0-OSC-24DC |
Pre-assembled solid-state relay module with screw connection, consisting of: relay base with ejector and plugin miniature solid-state relay. Input voltage: 24 V DC. Output: 24 - 253 V AC/0.75 A
|
PHOENIX CONTACT
|
| CYM9263-66C CYM9260 CYM9260-50C CYM9260-66C CYM926 |
64K/128K/256K/512K x 72 SRAM Module
64K(128K, 256K, 512K) x 72 SRAM Module
PRE-PLUG SNAGLESS MODULAR BOOT
CAT5 MOD PLUGS, STRANDED SHIELDED 25 PK
PURPLE PRE-PLUG BOOT 50 PAK
CAT 6 KEY COUP BLACK THROUGH COUPLER
WHITE PRE-PLUG 50 PK 256K X 72 CACHE SRAM MODULE, 14 ns, DMA168
|
CYPRESS[Cypress Semiconductor]
Cypress Semiconductor Corp.
Cypress Semiconductor, Corp.
|
| ECF110C5E-S |
KIT SHOWN FULLY ASSEMBLED FOR CLARITY (KIT IS SHIPPED UN-ASSEMBLED)
|
List of Unclassifed Manufacturers
List of Unclassifed Man...
|
| SPS-448-6-E SPS-448-3-E SPS-448-2-E |
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频6.8 kHz的接收前置放大器模块)
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频3.3 kHz的接收前置放大器模块)
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频6.7 kHz的接收前置放大器模块)
Receiver Pre-amp Module for Infrared Remote Control(用于红外远程控制的载波频33.3 kHz的接收前置放大器模块) 接收机前置放大器的红外遥控器（用于红外远程控制的载波频率33.3千赫模块的接收前置放大器模块
|
Sanyo Electric Co.,Ltd.
Sanyo Electric Co., Ltd.
|
| SPS-444 |
Receiver Pre-amp Module
|
Sanyo
|
| V048K480T006 P048F048M24AL P048F048T24AL P048K048M |
VI Chip - PRM-AL Pre-regulator Module
|
VICOR[Vicor Corporation]
|
| ECG1087 |
GENERAL-PURPOSE PRE-AMPLIFIER MODULE
|
List of Unclassifed Manufacturers
ETC[ETC]
|
| ECG1083 |
DUAL CHANNEL HYBRID AUDIO PRE-AMPLIFIER MODULE
|
List of Unclassifed Manufacturers
ETC[ETC]
|
| SKY65709-51 |
Low-Noise Amplifier Front-End Module with GPS-GNSS Pre-Filter
|
Skyworks Solutions Inc.
|
| EL1-P16 |
Relay retaining bracket, with eject function and integrated equipment marking area (7.5 x 15 mm), to suit relay socket PR1, for 16 mm high miniature power relay and solid-state relay
|
PHOENIX CONTACT
|
